Not health advice. Contact your local water utility for concerns.
Data from EPA Water Quality Reports. For official information, contact your water utility or health department.
EPA records for SAN LUIS CITY OF • Updated September 2026
Grade F — based on EPA compliance records, lead testing and PFAS monitoring
SAN LUIS CITY OF has serious issues in EPA's records: repeated health-based violations, unresolved violations, PFAS above the federal limit or lead near the action level. We recommend filtering drinking water.
San Luis, AZ tap water is legal to drink but grades F on EPA's records, mainly because of 2 health-based EPA violations in the last five years (1 unresolved). A certified filter matched to that finding is a reasonable precaution.
San Luis, AZ tap water is legal to drink but grades F on EPA's records, mainly because of 2 health-based EPA violations in the last five years (1 unresolved). A certified filter matched to that finding is a reasonable precaution.
SAN LUIS CITY OF's most recent Lead and Copper Rule result (2022-01-01 to 2024-12-31) was 1 ppb at the 90th percentile, below EPA's 15 ppb action level. Because lead usually comes from service lines and household plumbing, homes built before 1986 should still test at the tap.
No. None of the 348 UCMR5 PFAS results for SAN LUIS CITY OF (2024-09-25 to 2025-08-25) were at or above the reporting limit of roughly 3–5 ppt.
SAN LUIS CITY OF has 12 violations on file since 2016: 2 health-based in the last five years (1 still unresolved) and 3 monitoring or reporting violations in that window. Monitoring violations are paperwork lapses, not measured contamination.
SAN LUIS CITY OF reports groundwater as its primary source and serves about 39,705 people (EPA PWSID AZ0414005).
We recommend one. Check which contaminant the violations involved (table above) and choose a filter certified for it.
Compare filter options for your San Luis tap water
SAN LUIS CITY OF has 2 health-based EPA violations in the last five years.
Unsure which contaminants to treat? Compare home kits and certified lab testing before buying.
Amazon. We may earn a commission, at no extra cost to you.
SAN LUIS CITY OF · SDWIS records since 2016 · 5-year window starts 2021-09-13
EPA records 2 health-based violations for this system in the last five years, and 1 health-based violation is still listed as unaddressed or addressed-but-not-resolved. Health-based violations mean a contaminant exceeded its Maximum Contaminant Level (MCL) or a required treatment step was not met.
| Violation | Category | Compliance period | Status |
|---|---|---|---|
| Failure To Address DeficiencyGroundwater Rule | Treatment technique | 2024-06-06 | Resolvedreturned 2024-12-30 |
| Treatment Technique, Level 1 Assessment (RTCR)Revised Total Coliform Rule | Treatment technique | 2021-09-15 | Unaddressed |
| Failure To Address DeficiencyGroundwater Rule | Treatment technique | 2021-08-05 | Resolvedreturned 2021-11-12 |
| Follow-up Or Routine LCR Tap M/RLead and Copper Rule | Monitoring & reporting | 2024-10-01 | Resolvedreturned 2024-11-01 |
| Report Sample Result/Fail Monitor (RTCR)Revised Total Coliform Rule | Reporting | 2024-02-01 | Resolvedreturned 2024-03-19 |
| Lead Consumer NoticeLead and Copper Rule | Monitoring & reporting | 2021-09-28 | Resolvedreturned 2022-01-31 |
| Failure Submit IDSE/Subpart V Plan RptTTHM | Monitoring & reporting | 2021-09-08 | Resolvedreturned 2022-03-07 |
| Monitoring, Source Water (GWR)E. COLI | Monitoring & reporting | 2021-09-01 | Resolvedreturned 2022-07-05 |
| Sample Siting Plan Errors (RTCR)Revised Total Coliform Rule | Other | 2021-08-01 | Resolvedreturned 2021-10-28 |
| Consumer Confidence Report Complete Failure to ReportConsumer Confidence Rule | Other | 2019-07-01 | Resolvedreturned 2019-09-12 |
| Report Sample Result/Fail Monitor (RTCR)Revised Total Coliform Rule | Reporting | 2019-05-01 | Resolvedreturned 2019-07-08 |
| Report Sample Result/Fail Monitor (RTCR)Revised Total Coliform Rule | Reporting | 2017-09-01 | Resolvedreturned 2017-09-11 |
Source: ECHO SDWA bulk download (SDWA_VIOLATIONS_ENFORCEMENT.csv, SDWIS 2026Q2, file dated 2026-07-09, fetched 2026-09-13)
EPA Lead and Copper Rule 90th-percentile results reported by SAN LUIS CITY OF
Well below the 15 ppb action level. In the most recent monitoring period on file (2022-01-01 to 2024-12-31), 90% of the homes SAN LUIS CITY OF sampled had lead at or below 1 ppb.
EPA's action level is 15 ppb (dropping to 10 ppb under the 2024 Lead and Copper Rule Improvements). There is no safe level of lead; the 90th-percentile figure describes the system, not your tap — homes with lead service lines or pre-1986 plumbing can be higher.
| Monitoring period | Lead 90th percentile | vs 15 ppb action level |
|---|---|---|
| 2022-01-01 → 2024-12-31 | 1 ppb | Well below the 15 ppb action level |
| 2019-01-01 → 2021-12-31 | 0 ppb | Well below the 15 ppb action level |
| 2016-01-01 → 2018-12-31 | 2 ppb | Well below the 15 ppb action level |
| 2013-01-01 → 2015-12-31 | 1.64 ppb | Well below the 15 ppb action level |
| 2010-01-01 → 2012-12-31 | 2.95 ppb | Well below the 15 ppb action level |
| 2009-01-01 → 2011-12-31 | 6.7 ppb | Below the action level, but detectable |
| 2009-01-01 → 2009-12-31 | 6.7 ppb | Below the action level, but detectable |
| 2008-01-01 → 2008-12-31 | 4.3 ppb | Well below the 15 ppb action level |
| 2006-01-01 → 2008-12-31 | 4.3 ppb | Well below the 15 ppb action level |
| 2002-01-01 → 2004-12-31 | 0 ppb | Well below the 15 ppb action level |
| 2003-01-01 → 2003-12-31 | 0 ppb | Well below the 15 ppb action level |
Source: ECHO SDWA bulk download (SDWA_LCR_SAMPLES.csv, SDWIS 2026Q2, file dated 2026-07-09, fetched 2026-09-13)
EPA UCMR5 monitoring, 2024-09-25 to 2025-08-25 · 348 PFAS results at entry points to the distribution system
No PFAS detected. None of the 348 UCMR5 PFAS results for SAN LUIS CITY OF were at or above the method reporting limit. Reporting limits are about 3–5 ppt, so “not detected” means below that threshold — not proven zero.
| Compound | Detects / samples | Max (ppt) | Reporting limit | EPA MCL |
|---|---|---|---|---|
| PFOA | 0 / 12 | < 4 | 4 ppt | 4 ppt |
| PFOS | 0 / 12 | < 4 | 4 ppt | 4 ppt |
| PFHxS | 0 / 12 | < 3 | 3 ppt | 10 ppt |
| PFNA | 0 / 12 | < 4 | 4 ppt | 10 ppt |
| HFPO-DA | 0 / 12 | < 5 | 5 ppt | 10 ppt |
| PFBS | 0 / 12 | < 3 | 3 ppt | hazard index only |
“< 4 ppt” means below the laboratory reporting limit, not zero. ppt = parts per trillion (ng/L). Results are for finished water leaving the treatment plant.
Lithium (also monitored under UCMR5, not a PFAS): detected in 12 of 12 samples, max 103 µg/L. There is no federal limit for lithium.
What PFAS are and how to remove them →
Source: UCMR5 occurrence data, EPA Data Summary July 2026 (UCMR5_All.txt)
EPA Six-Year Review 4 compliance samples for SAN LUIS CITY OF · finished water only · dated data, released 2024
These are the regulated-contaminant samples SAN LUIS CITY OF reported to its state between 2012 and 2019 — the most recent nationwide sample-level dataset EPA has published. Total trihalomethanes (TTHM) is flagged below; the status column explains why. Treat this as history, not today's tap water.
| Contaminant | Samples | Average | Max | EPA limit | Status |
|---|---|---|---|---|---|
| Arsenic | 1812 detects | 0.827 µg/L | 2.3 µg/L | 10 µg/LMCL | Within MCL |
| Nitrate (as N) | 5418 detects | 0.105 mg/L | 1.21 mg/L | 10 mg/LMCL | Within MCL |
| Fluoride | 186 detects | 0.082 mg/L | 0.29 mg/L | 4 mg/LMCL | Within MCL |
| Chromium (total) | 180 detects | 0 µg/L | ND | 100 µg/LMCL | Not detected |
| Uranium (combined) | 20 detects | 0 µg/L | ND | 30 µg/LMCL | Not detected |
| Radium-226/228 | 209 detects | 0.967 pCi/L | 4.64 pCi/L | 5 pCi/LMCL | Within MCL |
| Gross alpha | 2 | 1.6 pCi/L | 2.3 pCi/L | 15 pCi/LMCL | Within MCL |
| Total trihalomethanes (TTHM) | 148 | 56.042 µg/L | 102 µg/L | 80 µg/LMCL (LRAA) | 8 single samples over MCL; average within limit |
| Haloacetic acids (HAA5) | 148140 detects | 10.456 µg/L | 25.8 µg/L | 60 µg/LMCL (LRAA) | Within MCL |
| Lead (tap samples) | 9027 detects | 0.71 µg/L | 8.27 µg/L | 15 µg/Laction level (90th percentile) | Reported, not scored (compliance is on the 90th percentile) |
| Copper (tap samples) | 90 | 240.634 µg/L | 1610 µg/L | 1300 µg/Laction level (90th percentile) | Reported, not scored (compliance is on the 90th percentile) |
Averages count non-detects as zero. TTHM and HAA5 limits are locational running annual averages, so a single high sample is not a violation — we grade those on the average only. Lead and copper rows are individual tap samples and are shown for context; compliance (and our score) uses the 90th-percentile result above. LRAA = locational running annual average; ND = not detected.
Source: SYR4 Six-Year Review compliance monitoring data 2012–2019 (released 2024-03)
A point-of-use (under-sink) system typically runs $200-$600 installed; whole-house treatment $1,000-$3,000+ depending on flow and what has to come out. Tell us where you are and a certified water-treatment installer serving San Luis will follow up - no obligation.
SAN LUIS CITY OF · 8,952 service lines inventoried · Q2 2026 snapshot
SAN LUIS CITY OF reports no lead or galvanized-requiring-replacement service lines and has classified 100% of its 8,952 lines as non-lead. Lead can still come from pre-1986 plumbing and fixtures inside a home.
Source: EPA SDWIS Service Line Inventory (Q2 2026) · PWS ID AZ0414005 · See all Arizona lead service lines. We may earn a commission from filters and test kits, at no extra cost to you.
Groundwater systems draw from wells; naturally occurring arsenic, nitrate, radium and uranium are the readings to watch, along with PFAS near industrial or military sites.
How to test your tap water and the treatment options that actually fit San Luis homes
The most reliable way to know what is actually coming out of your tap is a certified mail-in lab test. City-wide EPA data (like the report above) reflects the water leaving the treatment plant, but contaminants such as lead and copper can be picked up from your own service line and household plumbing — so the water at your San Luis faucet can differ from the system average. A state-certified lab measures dozens of contaminants at once with results you can trust; you can also find one near you through the EPA's certified-lab list at epa.gov/dwlabcert. Hardware-store test strips are cheaper and instant, but they only screen for a few basics (chlorine, hardness, pH, and a rough lead pass/fail) and are far less accurate — treat them as a first look, not a diagnosis.
Match the treatment to what your test finds. Reverse osmosis (RO) removes the widest range of contaminants — lead, arsenic, nitrate, PFAS, and dissolved solids — which makes an under-sink reverse osmosis system the most thorough choice for San Luis households with heavy-metal or PFAS concerns. If your main issue is taste, odor, or chlorine, an activated carbon filter (pitcher, faucet, or under-sink) is simpler and cheaper and handles chlorine and many organic compounds well, though carbon alone does not remove arsenic, nitrate, or most PFAS. NSF-certified pitchers rated for lead reduction are the easiest way to start today while you decide on a permanent setup.
We may earn a commission from testing kits and filters purchased through these links, at no extra cost to you.
What San Luis residents measured at their own tap (ZIPs 85336, 85349, 85350). All reader results →
Reader submissions are unverified and shown separately from EPA data. They reflect one tap on one day, not the utility's compliance record.
No reader results for San Luis yet - yours would be the first. A hardness or TDS number from a $10 strip kit is enough to start the map.
Help build the first reader-sourced water map. Enter whatever your test strip, TDS pen or lab report shows - one number is enough.
San Luis ranks #33 of 37 graded Arizona cities.
San Luis, AZ tap water is legal to drink but grades F on EPA's records, mainly because of 2 health-based EPA violations in the last five years (1 unresolved). A certified filter matched to that finding is a reasonable precaution.
SAN LUIS CITY OF's most recent Lead and Copper Rule result (2022-01-01 to 2024-12-31) was 1 ppb at the 90th percentile, below EPA's 15 ppb action level. Because lead usually comes from service lines and household plumbing, homes built before 1986 should still test at the tap.
No. None of the 348 UCMR5 PFAS results for SAN LUIS CITY OF (2024-09-25 to 2025-08-25) were at or above the reporting limit of roughly 3–5 ppt.
SAN LUIS CITY OF has 12 violations on file since 2016: 2 health-based in the last five years (1 still unresolved) and 3 monitoring or reporting violations in that window. Monitoring violations are paperwork lapses, not measured contamination.
SAN LUIS CITY OF reports groundwater as its primary source and serves about 39,705 people (EPA PWSID AZ0414005).
We recommend one. Check which contaminant the violations involved (table above) and choose a filter certified for it.
SAN LUIS CITY OF has 2 health-based EPA violations in the last five years.
Recommended for Your Water
ZeroWater 10-Cup Pitcher
NSF 53 certified to reduce lead, chromium & dissolved solids — no install needed, the easiest place to start.
Check Price on AmazonCompare direct from Waterdrop
No-install filter pitchers
Several readings are elevated — a filter pitcher is the easiest starting point, with nothing to install.
Shop Filter Pitchers →Whole-Home Filtration System
Whole-house system — treats every tap at the source
For consistently poor water, a whole-home system filters every faucet, shower, and appliance — the permanent, install-once fix that goes beyond a single point-of-use filter.
Explore Whole-Home SystemsNot sure what filter you need?
Test your tap water first, so you filter for what's actually in it.
Shop Home Water Test Kits →We may earn a commission from Amazon and Waterdrop when you purchase through our links, at no extra cost to you.
Find the right filter for your San Luis water quality needs:
Tap water is one piece of the picture — our sister sites cover the rest for San Luis, AZ.
County radon prediction and EPA zone for homes around San Luis.
Arsenic and nitrate risk for homes on a well instead of city water.
Understand your water better with our in-depth guides on contaminants, filtration, and water safety.