Loading water data...
Not health advice. Contact your local water utility for concerns.
Data from EPA Water Quality Reports. For official information, contact your water utility or health department.
Matched to what EPA's records actually show for BLOOMFIELD WATER DEPARTMENT (grade F, 54/100) — not to what sells.
EPA SDWIS/ECHO 2026Q2 · UCMR5 (2023–2026, July 2026 release) · SYR4 six-year review 2012–2019 · Full Bloomfield Town water quality report · Methodology
Activated carbon block (disinfection byproducts). Disinfection byproducts averaged above 80% of the EPA limit in BLOOMFIELD WATER DEPARTMENT's 2012–2019 monitoring. Carbon block filters reduce TTHM and HAA5 along with the chlorine taste that comes with them; any RO system's carbon stages do the same.
Based on EPA records for BLOOMFIELD WATER DEPARTMENT, yes: activated carbon block (disinfection byproducts) is the first fix (see the evidence table above).
An NSF/ANSI 42 carbon pitcher or faucet filter for chlorine taste; add NSF/ANSI 53 lead reduction if your home predates 1986.
BLOOMFIELD WATER DEPARTMENT's latest Lead and Copper Rule 90th-percentile result was 1.27 ppb (2026-01-01 to 2026-06-30), below the 15 ppb action level. Lead enters from service lines and home plumbing, so test at the tap if your home is older.
No. None of the 116 UCMR5 PFAS results for BLOOMFIELD WATER DEPARTMENT (2023-11-15 to 2024-08-27) were at or above the reporting limit.
Look for: NSF/ANSI 53 with a TTHM/VOC claim, or NSF/ANSI 42 for taste
Disinfection byproducts averaged above 80% of the EPA limit in BLOOMFIELD WATER DEPARTMENT's 2012–2019 monitoring. Carbon block filters reduce TTHM and HAA5 along with the chlorine taste that comes with them; any RO system's carbon stages do the same.
| Evidence | Result | EPA limit | Period | Source |
|---|---|---|---|---|
| Total trihalomethanes (TTHM) | 69.754 ug/L (average of 127 samples) | 80 ug/L | 2012–2019 | EPA SYR4 six-year review |
| Haloacetic acids (HAA5) | 62.006 ug/L (average of 127 samples) | 60 ug/L | 2012–2019 | EPA SYR4 six-year review |
Look for: Certified drinking-water lab
Utility data describes water leaving BLOOMFIELD WATER DEPARTMENT. Lead, copper and some PFAS enter between the main and your faucet, so a mail-in lab test is the only way to know what your household actually drinks — and the cheapest way to avoid buying a filter you do not need.
Rows are the contaminants EPA data actually flags for Bloomfield Town. ✓ removes (when certified) · ◐ only specific certified models or media · ✗ does not remove.
| Removes | Pitcher | Under-sink carbon | Reverse osmosis |
|---|---|---|---|
| Disinfection byproducts (TTHM / HAA5) | ◐ | ✓ | ✓ |
| Chlorine taste and odor | ✓ | ✓ | ✓ |
| Typical cost | typically $25–$50 + filters | typically $40–$150 | typically $150–$400 |
| Install | none (renters) | under the sink, ~15 min | under sink + faucet; drain line |
| Certification to look for | NSF/ANSI 42 / 53 | NSF/ANSI 42 / 53 | NSF/ANSI 58 |
| Verified picks | ZeroWater 10-cup · Brita Elite · Waterdrop pitchers | Waterdrop TSA · Waterdrop 10UA | APEC ROES-50 · Waterdrop tankless RO |
Cost ranges are typical retail prices, not quotes. Removal marks describe the filter class when certified for that contaminant — always check the NSF/ANSI listing of the exact cartridge. Full pitcher vs under-sink vs faucet comparison →
A filter is only certified up to its rated capacity — breakthrough happens when a cartridge runs past it. Budget the cartridges, not just the unit.
| Filter | Change interval | Annual cartridge cost | Replacements |
|---|---|---|---|
| Reverse osmosis (APEC ROES-50) | typically pre-filters every 6–12 months, RO membrane every 2–3 years, post-carbon yearly | typically $50–$90 | Replacement RO filter sets → |
| Under-sink carbon block (Waterdrop TSA / 10UA) | typically every 6–12 months (rated 8,000 gal or 12 months) | typically $30–$60 | Replacement under-sink cartridges → |
| Pitcher (ZeroWater / Brita Elite) | typically every 2–6 months (ZeroWater 20–40 gal depending on TDS; Brita Elite 120 gal ≈ 6 months) | typically $60–$150 | Replacement pitcher filters → |
Amazon Subscribe & Save ships cartridges on the interval you choose at a small recurring discount, which is the easiest way to keep a certified filter within its rated life. Costs are typical retail figures, not quotes; check the capacity printed on your exact cartridge.
A point-of-use (under-sink) system typically runs $200-$600 installed; whole-house treatment $1,000-$3,000+ depending on flow and what has to come out. Tell us where you are and a certified water-treatment installer serving Bloomfield Town will follow up - no obligation.
BLOOMFIELD WATER DEPARTMENT has 3 health-based EPA violations in the last five years.
Best for Chlorine, Taste & Odor
Waterdrop Under-Sink Filter
NSF 42 certified carbon removes chlorine taste & odor — connects to your faucet line in minutes.
Check Price on AmazonCompare direct from Waterdrop
Filters rated for chlorine, taste & odor
Waterdrop's chlorine, taste & odor collection — carbon filters made for exactly the disinfectant byproducts flagged above.
Shop Chlorine & Taste Filters →Whole-Home Filtration System
Whole-house system — treats every tap at the source
For consistently poor water, a whole-home system filters every faucet, shower, and appliance — the permanent, install-once fix that goes beyond a single point-of-use filter.
Explore Whole-Home SystemsNot sure what filter you need?
Test your tap water first, so you filter for what's actually in it.
Shop Home Water Test Kits →We may earn a commission from Amazon and Waterdrop when you purchase through our links, at no extra cost to you.
Affiliate links (Amazon, Waterdrop, Tap Score): we may earn a commission at no extra cost to you. Recommendations are matched to EPA findings, not to commission rates.