Loading water data...
Whether you are on a private well or a city system, a meaningful water test comes from a certified laboratory. This page gives you South Carolina's official certification program and lab list, a mail-in alternative, the state's EPA testing record, and the sampling steps labs expect you to follow.
A certified mail-in lab test shows exactly what's in your water — lead plus dozens of other contaminants — with EPA-grade accuracy. Know your real levels before spending on a filter.
Certified lab · results in days
Prefer the free official route? South Carolina's state-certified drinking water laboratory list (search filter: drinking water) is published by South Carolina Department of Environmental Services.
Use a laboratory certified by the state's drinking-water lab certification program (free official list linked below) or a certified mail-in lab. South Carolina Department of Environmental Services certifies drinking-water laboratories in South Carolina; its list of certified labs is published online. On city water, read your utility's free Consumer Confidence Report first; on a private well, test annually for bacteria and nitrate.
Any laboratory on the South Carolina Department of Environmental Services certified drinking-water lab list (search filter: drinking water), or a certified mail-in lab such as Tap Score. Local health departments sometimes offer subsidized bacteria and nitrate tests for well owners.
Public water systems in South Carolina must sample on an EPA schedule and publish a Consumer Confidence Report every year. We do not yet grade individual South Carolina cities, so check your utility's report directly. Lead at your own tap still needs your own sample.
Lab fees vary, but a single lead, bacteria or nitrate test is typically $20–$60, a basic well panel typically $100–$250, and a broad panel with metals, VOCs and PFAS typically $250–$600 (2026). Some public-health labs subsidize bacteria and nitrate tests for private wells.
Yes if your home was built before 1986, if your utility has told you your service line is lead or of unknown material, or if an infant drinks formula mixed with tap water. South Carolina utilities have reported 7,999 confirmed lead service lines and 349,307 lines of still-unknown material to EPA (Q2 2026 inventory). Use a first-draw sample after water has sat 6+ hours.
Source: EPA, State Certification Programs Certify Laboratories to Conduct Drinking Water Analyses (August 2025 (EPA Office of Water MS-140)). Links verified 2026-09-07.
EPA does not test residential water on request; it directs households to state-certified labs. Directory: epa.gov/dwlabcert. Private well guidance: epa.gov/privatewells.
We do not yet grade any South Carolina city from EPA compliance data, so there are no city-level lead, PFAS or violation counts to show here. The statewide lead service line inventory below is real EPA data; for everything else, start with your utility's Consumer Confidence Report.
Lead service lines: 7,999 confirmed lead, 11,251 galvanized requiring replacement and 349,307 unknown-material lines (17% of 2,040,969 inventoried) across 643 systems. Utility-by-utility South Carolina inventory →
If you are on a private well, you are the utility: nobody samples your water unless you do. EPA recommends testing a well every year for total coliform bacteria, nitrate, total dissolved solids and pH, and more often if anyone in the home is pregnant or an infant, if neighbors report a problem, or if the well head was flooded or repaired.
If a public utility serves you, its compliance testing covers the water leaving the plant and a sample of taps across the system — not your specific faucet. Test your own tap when your utility flags your service line as lead or unknown material, when plumbing pre-dates the 1986 lead ban, after a main break or discoloration, or before mixing infant formula with tap water.
The Safe Drinking Water Act regulates public systems only; a private well in South Carolina is tested when the owner pays for it. Use the certified-lab list above to find a lab, and ask your county health department what is common in local groundwater — nitrate, arsenic, radon or uranium, depending on the geology and land use around you — so the panel you order fits the risk.
Your utility's annual Consumer Confidence Report (due each July 1) is the free baseline: detected regulated contaminants, the range of results, the legal limit and any violations. Two gaps to keep in mind — it reports system-wide results rather than your tap, so it cannot tell you about lead from your own pipes, and it omits unregulated chemicals unless the utility volunteers them.
EPA's CCR rule and a national lookup tool: epa.gov/ccr.
A hardware-store strip kit is a screening tool: useful for hardness, chlorine, pH and rough nitrate, useless for the contaminants people actually worry about. Lead's action level is 15 ppb, the PFOA/PFOS limit is 4 ppt, and no visual kit reads at those levels. Treat a clean strip as "not grossly contaminated", not as "safe".
A certified laboratory — whether you mail a sample to a national lab or drop it at a local one — uses the same EPA-approved methods your utility must use, reports numeric results with detection limits, and is the only kind of result a health department, landlord dispute or well-sale contract will accept.
Prices vary by lab and by how many analytes you order, but as of 2026 a single-contaminant test (lead, or total coliform, or nitrate) at a state-certified lab typically runs about $20 to $60. A basic well "potability" panel is typically $100 to $250. Broad panels that add metals, VOCs and PFAS are typically $250 to $600, with PFAS alone often $200 or more because of the specialized method. Some state or county health labs offer subsidized bacteria and nitrate tests for well owners — the certified-lab list above is the place to check.
Lead almost always comes from your own plumbing, not the treatment plant, so the sample has to capture water that sat in your pipes. EPA's compliance protocol, which most lab kits copy, works like this:
Affiliate disclosure: the Tap Score link above may earn US Water Grade a commission at no cost to you. The state lab list is free and official; we recommend it just as readily.