Loading water data...
Whether you are on a private well or a city system, a meaningful water test comes from a certified laboratory. This page gives you Maine's official certification program and lab list, a mail-in alternative, the state's EPA testing record, and the sampling steps labs expect you to follow.
A certified mail-in lab test shows exactly what's in your water — lead plus dozens of other contaminants — with EPA-grade accuracy. Know your real levels before spending on a filter.
Certified lab · results in days
Prefer the free official route? Maine's state-certified drinking water laboratory list (PDF) is published by Maine Department of Health & Human Services, Drinking Water Program.
Use a laboratory certified by the state's drinking-water lab certification program (free official list linked below) or a certified mail-in lab. Maine Department of Health & Human Services, Drinking Water Program certifies drinking-water laboratories in Maine; its list of certified labs is published online. On city water, read your utility's free Consumer Confidence Report first; on a private well, test annually for bacteria and nitrate.
Any laboratory on the Maine Department of Health & Human Services, Drinking Water Program certified drinking-water lab list (PDF), or a certified mail-in lab such as Tap Score. Local health departments sometimes offer subsidized bacteria and nitrate tests for well owners.
Yes — public systems must sample on an EPA schedule and publish results every year. In our EPA-based dataset 0 of 11 graded Maine cities had at least one health-based violation in the past five years, 2 of the 11 Maine systems with recent lead sampling reported a 90th-percentile lead result of 5 ppb or more, and 2 of 11 systems sampled under EPA's UCMR5 program detected at least one PFAS compound. That testing covers the system, not your specific tap, so lead at your faucet still needs your own sample.
Lab fees vary, but a single lead, bacteria or nitrate test is typically $20–$60, a basic well panel typically $100–$250, and a broad panel with metals, VOCs and PFAS typically $250–$600 (2026). Some public-health labs subsidize bacteria and nitrate tests for private wells.
Yes if your home was built before 1986, if your utility has told you your service line is lead or of unknown material, or if an infant drinks formula mixed with tap water. Maine utilities have reported 29 confirmed lead service lines and 41,667 lines of still-unknown material to EPA (Q2 2026 inventory). Use a first-draw sample after water has sat 6+ hours.
Source: EPA, State Certification Programs Certify Laboratories to Conduct Drinking Water Analyses (August 2025 (EPA Office of Water MS-140)). Links verified 2026-09-07.
EPA does not test residential water on request; it directs households to state-certified labs. Directory: epa.gov/dwlabcert. Private well guidance: epa.gov/privatewells.
These figures cover the 11 Maine cities we grade from EPA compliance data (EPA SDWIS/ECHO 2026Q2 · UCMR5 (2023–2026, July 2026 release) · SYR4 six-year review 2012–2019). They describe utilities, not your tap — use them to decide which contaminants are worth paying a lab for.
Lead service lines: 29 confirmed lead, 1,575 galvanized requiring replacement and 41,667 unknown-material lines (14% of 291,891 inventoried) across 771 systems. Utility-by-utility Maine inventory →
| City | Population served | Grade | Health-based violations (5 yr) | Lead ≥ 5 ppb | PFAS detected |
|---|---|---|---|---|---|
| Portland | 135,068 | B | 0 | No | No |
| Biddeford | 42,508 | A | 0 | No | No |
| Saco | 42,508 | A | 0 | No | No |
| Bangor | 27,298 | A | 0 | Yes | No |
| Lewiston | 23,720 | A | 0 | No | No |
All 11 graded cities: Maine water quality by city.
If you are on a private well, you are the utility: nobody samples your water unless you do. EPA recommends testing a well every year for total coliform bacteria, nitrate, total dissolved solids and pH, and more often if anyone in the home is pregnant or an infant, if neighbors report a problem, or if the well head was flooded or repaired.
If a public utility serves you, its compliance testing covers the water leaving the plant and a sample of taps across the system — not your specific faucet. Test your own tap when your utility flags your service line as lead or unknown material, when plumbing pre-dates the 1986 lead ban, after a main break or discoloration, or before mixing infant formula with tap water.
A hardware-store strip kit is a screening tool: useful for hardness, chlorine, pH and rough nitrate, useless for the contaminants people actually worry about. Lead's action level is 15 ppb, the PFOA/PFOS limit is 4 ppt, and no visual kit reads at those levels. Treat a clean strip as "not grossly contaminated", not as "safe".
A certified laboratory — whether you mail a sample to a national lab or drop it at a local one — uses the same EPA-approved methods your utility must use, reports numeric results with detection limits, and is the only kind of result a health department, landlord dispute or well-sale contract will accept.
Lead almost always comes from your own plumbing, not the treatment plant, so the sample has to capture water that sat in your pipes. EPA's compliance protocol, which most lab kits copy, works like this:
Your utility's annual Consumer Confidence Report (due each July 1) is the free baseline: detected regulated contaminants, the range of results, the legal limit and any violations. Two gaps to keep in mind — it reports system-wide results rather than your tap, so it cannot tell you about lead from your own pipes, and it omits unregulated chemicals unless the utility volunteers them.
EPA's CCR rule and a national lookup tool: epa.gov/ccr.
The Safe Drinking Water Act regulates public systems only; a private well in Maine is tested when the owner pays for it. Use the certified-lab list above to find a lab, and ask your county health department what is common in local groundwater — nitrate, arsenic, radon or uranium, depending on the geology and land use around you — so the panel you order fits the risk.
Prices vary by lab and by how many analytes you order, but as of 2026 a single-contaminant test (lead, or total coliform, or nitrate) at a state-certified lab typically runs about $20 to $60. A basic well "potability" panel is typically $100 to $250. Broad panels that add metals, VOCs and PFAS are typically $250 to $600, with PFAS alone often $200 or more because of the specialized method. Some state or county health labs offer subsidized bacteria and nitrate tests for well owners — the certified-lab list above is the place to check.
Affiliate disclosure: the Tap Score link above may earn US Water Grade a commission at no cost to you. The state lab list is free and official; we recommend it just as readily.