Loading water data...
Two honest routes: the free, official list of laboratories District of Columbia certifies to test drinking water, or a certified mail-in kit that ships to your door. Below is the official contact, what our EPA-based data says about District of Columbia systems, and how to take a sample that actually means something.
A certified mail-in lab test shows exactly what's in your water — lead plus dozens of other contaminants — with EPA-grade accuracy. Know your real levels before spending on a filter.
Certified lab · results in days
Prefer the free official route? U.S. EPA Region 3 Laboratory Services does not publish a lab list online (not available) — ask the program or start from EPA's directory.
U.S. EPA Region 3 Laboratory Services handles laboratory certification for the District of Columbia, but does not publish a public lab list online (not available) — contact the program, or start from EPA's state certification-officer directory. Any state-certified lab — or a certified mail-in service — uses the same EPA-approved methods your utility must use. Well owners should test every year for bacteria and nitrate; city-water customers should test their own tap mainly for lead, which comes from home plumbing.
Contact U.S. EPA Region 3 Laboratory Services for a certified laboratory (EPA's directory of state certification officers links every state), or use a certified mail-in lab such as Tap Score.
Public water systems in District of Columbia must sample on an EPA schedule and publish a Consumer Confidence Report every year. We do not yet grade individual District of Columbia cities, so check your utility's report directly. Lead at your own tap still needs your own sample.
Lab fees vary, but a single lead, bacteria or nitrate test is typically $20–$60, a basic well panel typically $100–$250, and a broad panel with metals, VOCs and PFAS typically $250–$600 (2026). Some public-health labs subsidize bacteria and nitrate tests for private wells.
Yes if your home was built before 1986, if your utility has told you your service line is lead or of unknown material, or if an infant drinks formula mixed with tap water. District of Columbia utilities have reported 16,935 confirmed lead service lines and 13,428 lines of still-unknown material to EPA (Q2 2026 inventory). Use a first-draw sample after water has sat 6+ hours.
Source: EPA, State Certification Programs Certify Laboratories to Conduct Drinking Water Analyses (August 2025 (EPA Office of Water MS-140)). Links verified 2026-09-07.
EPA does not test residential water on request; it directs households to state-certified labs. Directory: epa.gov/dwlabcert. Private well guidance: epa.gov/privatewells.
We do not yet grade any District of Columbia city from EPA compliance data, so there are no city-level lead, PFAS or violation counts to show here. The statewide lead service line inventory below is real EPA data; for everything else, start with your utility's Consumer Confidence Report.
Lead service lines: 16,935 confirmed lead, 225 galvanized requiring replacement and 13,428 unknown-material lines (10% of 138,406 inventoried) across 5 systems. Utility-by-utility District of Columbia inventory →
Private well owners have no one testing on their behalf. EPA's guidance is an annual check for bacteria (total coliform), nitrate, total dissolved solids and pH — and an extra test any time the well is serviced, floods, or someone in the house becomes pregnant.
On city water the utility already tests at the treatment plant and at a sample of homes, so a routine test is usually unnecessary. It becomes worthwhile when something changes at your address: a notice that your service line is lead or unknown, a house built before 1986 with original plumbing, water that is discolored or smells different after a main break, or a newborn who will drink formula mixed with tap water.
Every community water system must publish a Consumer Confidence Report (CCR) by July 1 each year covering the previous calendar year. It lists every regulated contaminant detected, the highest and range of results, the EPA limit, and any violations. It will not tell you about lead at your own tap (that depends on your plumbing) or about anything unregulated, but it is the fastest free answer to "what is in my city's water".
EPA's CCR rule and a national lookup tool: epa.gov/ccr.
Private wells are not covered by the Safe Drinking Water Act, so none of the city data on this site applies to them and the state does not test them for you. The state laboratory certification program listed above is still the right place to find a lab, and many county health departments in District of Columbia will tell you which local contaminants (nitrate from agriculture, arsenic or radionuclides from bedrock, bacteria after flooding) are worth adding to the standard panel.
Color-change strips and drop kits are fine for screening things that show up at high concentration — hardness, chlorine, pH, and sometimes nitrate or bacteria presence/absence. They cannot reliably measure lead, arsenic, PFAS or other contaminants whose health limits are in the parts-per-billion (or parts-per-trillion) range; the detection limits are simply too high, and a "negative" strip is not evidence of safety.
Certified labs run the same EPA-approved methods that utilities are held to, report an actual number with a detection limit, and produce a document you can act on — with a landlord, a real-estate buyer, or the state health department.
Lead almost always comes from your own plumbing, not the treatment plant, so the sample has to capture water that sat in your pipes. EPA's compliance protocol, which most lab kits copy, works like this:
Expect roughly these ranges in 2026, keeping in mind that every lab sets its own fees: a single test for lead, bacteria or nitrate is typically $20 to $60; a standard well panel is typically $100 to $250; a wide panel including metals, volatile organics and PFAS is typically $250 to $600, and PFAS by itself is often $200 or more. Public-health laboratories in some states subsidize bacteria and nitrate tests for private wells, so check the official list before paying commercial rates.
Affiliate disclosure: the Tap Score link above may earn US Water Grade a commission at no cost to you. The state lab list is free and official; we recommend it just as readily.