Loading water data...
Not health advice. Contact your local water utility for concerns.
Data from EPA Water Quality Reports. For official information, contact your water utility or health department.
EPA records for MILWAUKEE WATERWORKS • Updated September 2026
Grade A — based on EPA compliance records, lead testing and PFAS monitoring
MILWAUKEE WATERWORKS has a clean recent record: no health-based violations in the last five years and no lead, PFAS or historical monitoring result that costs it more than a few points.
Yes — by EPA's records Milwaukee, WI tap water is safe to drink and earns an A. The grade rests on lead at 5.3 ppb (90th percentile) — under the 15 ppb action level but above 5 ppb. Lead from your own service line or plumbing is the main risk city-level data cannot see, so homes built before 1986 should still test at the tap.
Yes — by EPA's records Milwaukee, WI tap water is safe to drink and earns an A. The grade rests on lead at 5.3 ppb (90th percentile) — under the 15 ppb action level but above 5 ppb. Lead from your own service line or plumbing is the main risk city-level data cannot see, so homes built before 1986 should still test at the tap.
MILWAUKEE WATERWORKS's most recent Lead and Copper Rule result (2023-06-01 to 2023-09-30) was 5.3 ppb at the 90th percentile, below EPA's 15 ppb action level. Because lead usually comes from service lines and household plumbing, homes built before 1986 should still test at the tap.
No. None of the 232 UCMR5 PFAS results for MILWAUKEE WATERWORKS (2023-02-20 to 2023-11-13) were at or above the reporting limit of roughly 3–5 ppt.
No. EPA's SDWIS shows no violations of any kind for MILWAUKEE WATERWORKS since 2016.
MILWAUKEE WATERWORKS reports surface water as its primary source and serves about 626,000 people (EPA PWSID WI2410100).
Optional but sensible. The findings on this page are below federal limits; an NSF-certified pitcher or under-sink filter handles lead and improves taste.
Want to know what's really in your Milwaukee tap water?
Lead was found at 5.3 ppb (90th percentile) in Milwaukee's latest tap sampling — below the action level, but there is no safe level of lead.
Tap Score certified lab · Amazon. We may earn a commission, at no extra cost to you.
MILWAUKEE WATERWORKS · SDWIS records since 2016 · 5-year window starts 2021-09-07
EPA records no health-based violations for this system in the last five years.
No violations of any kind on file since 2016.
Source: ECHO SDWA bulk download (SDWA_VIOLATIONS_ENFORCEMENT.csv, SDWIS 2026Q2, file dated 2026-07-09, fetched 2026-09-06)
EPA Lead and Copper Rule 90th-percentile results reported by MILWAUKEE WATERWORKS
Below the action level, but detectable. In the most recent monitoring period on file (2023-06-01 to 2023-09-30), 90% of the homes MILWAUKEE WATERWORKS sampled had lead at or below 5.3 ppb.
EPA's action level is 15 ppb (dropping to 10 ppb under the 2024 Lead and Copper Rule Improvements). There is no safe level of lead; the 90th-percentile figure describes the system, not your tap — homes with lead service lines or pre-1986 plumbing can be higher.
| Monitoring period | Lead 90th percentile | vs 15 ppb action level |
|---|---|---|
| 2023-06-01 → 2023-09-30 | 5.3 ppb | Below the action level, but detectable |
| 2020-07-01 → 2020-10-31 | 6.2 ppb | Below the action level, but detectable |
| 2017-06-01 → 2017-09-30 | 7.2 ppb | Below the action level, but detectable |
| 2014-06-01 → 2014-09-30 | 8.1 ppb | Below the action level, but detectable |
| 2011-06-01 → 2011-09-30 | 6.1 ppb | Below the action level, but detectable |
| 2008-01-01 → 2008-12-31 | 5.2 ppb | Below the action level, but detectable |
| 2005-01-01 → 2005-12-31 | 5.7 ppb | Below the action level, but detectable |
| 2003-01-01 → 2003-12-31 | 10 ppb | Below the action level, but detectable |
| 2002-01-01 → 2002-06-30 | 6.1 ppb | Below the action level, but detectable |
| 2001-07-01 → 2001-12-31 | 8.4 ppb | Below the action level, but detectable |
| 2001-01-01 → 2001-06-30 | 9.5 ppb | Below the action level, but detectable |
| 1999-07-01 → 1999-12-31 | 12 ppb | Below the action level, but detectable |
Source: ECHO SDWA bulk download (SDWA_LCR_SAMPLES.csv, SDWIS 2026Q2, file dated 2026-07-09, fetched 2026-09-06)
EPA UCMR5 monitoring, 2023-02-20 to 2023-11-13 · 232 PFAS results at entry points to the distribution system
No PFAS detected. None of the 232 UCMR5 PFAS results for MILWAUKEE WATERWORKS were at or above the method reporting limit. Reporting limits are about 3–5 ppt, so “not detected” means below that threshold — not proven zero.
| Compound | Detects / samples | Max (ppt) | Reporting limit | EPA MCL |
|---|---|---|---|---|
| PFOA | 0 / 8 | < 4 | 4 ppt | 4 ppt |
| PFOS | 0 / 8 | < 4 | 4 ppt | 4 ppt |
| PFHxS | 0 / 8 | < 3 | 3 ppt | 10 ppt |
| PFNA | 0 / 8 | < 4 | 4 ppt | 10 ppt |
| HFPO-DA | 0 / 8 | < 5 | 5 ppt | 10 ppt |
| PFBS | 0 / 8 | < 3 | 3 ppt | hazard index only |
“< 4 ppt” means below the laboratory reporting limit, not zero. ppt = parts per trillion (ng/L). Results are for finished water leaving the treatment plant.
What PFAS are and how to remove them →
Source: UCMR5 occurrence data, EPA Data Summary July 2026 (UCMR5_All.txt)
EPA Six-Year Review 4 compliance samples for MILWAUKEE WATERWORKS · finished water only · dated data, released 2024
These are the regulated-contaminant samples MILWAUKEE WATERWORKS reported to its state between 2012 and 2019 — the most recent nationwide sample-level dataset EPA has published. Every scored contaminant stayed within its Maximum Contaminant Level (MCL) and averaged below 80% of the limit. Treat this as history, not today's tap water.
| Contaminant | Samples | Average | Max | EPA limit | Status |
|---|---|---|---|---|---|
| Arsenic | 203 detects | 0.07 µg/L | 0.5 µg/L | 10 µg/LMCL | Within MCL |
| Nitrate (as N) | 29 | 0.295 mg/L | 0.4 mg/L | 10 mg/LMCL | Within MCL |
| Fluoride | 213113 detects | 0.299 mg/L | 1.1 mg/L | 4 mg/LMCL | Within MCL |
| Chromium (total) | 202 detects | 0.05 µg/L | 0.5 µg/L | 100 µg/LMCL | Within MCL |
| Radium-226/228 | 4 | 1.298 pCi/L | 1.51 pCi/L | 5 pCi/LMCL | Within MCL |
| Gross alpha | 4 | 2.465 pCi/L | 3.6 pCi/L | 15 pCi/LMCL | Within MCL |
| Total trihalomethanes (TTHM) | 243 | 7.823 µg/L | 20.9 µg/L | 80 µg/LMCL (LRAA) | Within MCL |
| Haloacetic acids (HAA5) | 249186 detects | 1.575 µg/L | 6.1 µg/L | 60 µg/LMCL (LRAA) | Within MCL |
| Lead (tap samples) | 12590 detects | 3.605 µg/L | 130 µg/L | 15 µg/Laction level (90th percentile) | Reported, not scored (compliance is on the 90th percentile) |
| Copper (tap samples) | 125112 detects | 15.09 µg/L | 130 µg/L | 1300 µg/Laction level (90th percentile) | Reported, not scored (compliance is on the 90th percentile) |
Averages count non-detects as zero. TTHM and HAA5 limits are locational running annual averages, so a single high sample is not a violation — we grade those on the average only. Lead and copper rows are individual tap samples and are shown for context; compliance (and our score) uses the 90th-percentile result above. LRAA = locational running annual average; ND = not detected.
Source: SYR4 Six-Year Review compliance monitoring data 2012–2019 (released 2024-03)
A point-of-use (under-sink) system typically runs $200-$600 installed; whole-house treatment $1,000-$3,000+ depending on flow and what has to come out. Tell us where you are and a certified water-treatment installer serving Milwaukee will follow up - no obligation.
MILWAUKEE WATERWORKS · 160,819 service lines inventoried · Q2 2026 snapshot
MILWAUKEE WATERWORKS reports 65,331 service lines that are lead or galvanized-requiring-replacement (41% of the lines it has inventoried), plus 26,341 lines whose material is still unknown. A lead service line is the pipe between the water main and a building, so treated water can pick up lead after it leaves the plant — which city-level testing does not capture. Under EPA's Lead and Copper Rule Improvements, utilities must replace lead lines within 10 years starting in 2027.
Source: EPA SDWIS Service Line Inventory (Q2 2026) · PWS ID WI2410100 · See all Wisconsin lead service lines. We may earn a commission from filters and test kits, at no extra cost to you.
Surface-water systems draw from rivers, lakes or reservoirs and must filter and disinfect, which is why disinfection byproducts (TTHM, HAA5) are the readings to watch.
How to test your tap water and the treatment options that actually fit Milwaukee homes
The most reliable way to know what is actually coming out of your tap is a certified mail-in lab test. City-wide EPA data (like the report above) reflects the water leaving the treatment plant, but contaminants such as lead and copper can be picked up from your own service line and household plumbing — so the water at your Milwaukee faucet can differ from the system average. A state-certified lab measures dozens of contaminants at once with results you can trust; you can also find one near you through the EPA's certified-lab list at epa.gov/dwlabcert. Hardware-store test strips are cheaper and instant, but they only screen for a few basics (chlorine, hardness, pH, and a rough lead pass/fail) and are far less accurate — treat them as a first look, not a diagnosis.
Match the treatment to what your test finds. Reverse osmosis (RO) removes the widest range of contaminants — lead, arsenic, nitrate, PFAS, and dissolved solids — which makes an under-sink reverse osmosis system the most thorough choice for Milwaukee households with heavy-metal or PFAS concerns. If your main issue is taste, odor, or chlorine, an activated carbon filter (pitcher, faucet, or under-sink) is simpler and cheaper and handles chlorine and many organic compounds well, though carbon alone does not remove arsenic, nitrate, or most PFAS. NSF-certified pitchers rated for lead reduction are the easiest way to start today while you decide on a permanent setup.
We may earn a commission from testing kits and filters purchased through these links, at no extra cost to you.
Yes — by EPA's records Milwaukee, WI tap water is safe to drink and earns an A. The grade rests on lead at 5.3 ppb (90th percentile) — under the 15 ppb action level but above 5 ppb. Lead from your own service line or plumbing is the main risk city-level data cannot see, so homes built before 1986 should still test at the tap.
MILWAUKEE WATERWORKS's most recent Lead and Copper Rule result (2023-06-01 to 2023-09-30) was 5.3 ppb at the 90th percentile, below EPA's 15 ppb action level. Because lead usually comes from service lines and household plumbing, homes built before 1986 should still test at the tap.
No. None of the 232 UCMR5 PFAS results for MILWAUKEE WATERWORKS (2023-02-20 to 2023-11-13) were at or above the reporting limit of roughly 3–5 ppt.
No. EPA's SDWIS shows no violations of any kind for MILWAUKEE WATERWORKS since 2016.
MILWAUKEE WATERWORKS reports surface water as its primary source and serves about 626,000 people (EPA PWSID WI2410100).
Optional but sensible. The findings on this page are below federal limits; an NSF-certified pitcher or under-sink filter handles lead and improves taste.
Lead was found at 5.3 ppb (90th percentile) in Milwaukee's latest tap sampling — below the action level, but there is no safe level of lead.
Most Popular for Lead
Filters rated for lead reduction
Waterdrop lead collection · direct from the manufacturer
Waterdrop's lead collection — every filter here is selected for lead reduction, so you can compare options rated for this exact problem.
Shop Filters Rated for Lead →Or a specific pick on Amazon
ZeroWater 10-Cup Pitcher
NSF 53 certified to reduce lead & chromium — no installation, the easiest way to start protecting your water today.
Check Price on Amazon →Whole-Home Filtration System
Whole-house system — treats every tap at the source
For consistently poor water, a whole-home system filters every faucet, shower, and appliance — the permanent, install-once fix that goes beyond a single point-of-use filter.
Explore Whole-Home SystemsNot sure what filter you need?
Test your tap water first, so you filter for what's actually in it.
Shop Home Water Test Kits →We may earn a commission from Amazon and Waterdrop when you purchase through our links, at no extra cost to you.
Based on contaminants detected in your water, these resources may be helpful:
Find the right filter for your Milwaukee water quality needs:
Tap water is one piece of the picture — our sister sites cover the rest for Milwaukee, WI.
Live EPA AirNow AQI, dominant pollutant and forecast.
Predicted indoor radon by ZIP vs. the EPA 4 pCi/L action level.
Arsenic and nitrate risk for homes on a well instead of city water.
Understand your water better with our in-depth guides on contaminants, filtration, and water safety.