Loading water data...
Not health advice. Contact your local water utility for concerns.
Data from EPA Water Quality Reports. For official information, contact your water utility or health department.
EPA records for CITY OF BROOKHAVEN • Updated October 2026
Grade B — based on EPA compliance records, lead testing and PFAS monitoring
CITY OF BROOKHAVEN is in good standing with EPA, with only minor deductions for monitoring paperwork, low-level PFAS or historical readings near a limit.
Yes — by EPA's records Brookhaven, MS tap water is safe to drink and earns a B. The grade rests on 1 health-based EPA violation in the last five years and low-level PFAS (PFBS) detected below federal limits. Lead from your own service line or plumbing is the main risk city-level data cannot see, so homes built before 1986 should still test at the tap.
Yes — by EPA's records Brookhaven, MS tap water is safe to drink and earns a B. The grade rests on 1 health-based EPA violation in the last five years and low-level PFAS (PFBS) detected below federal limits. Lead from your own service line or plumbing is the main risk city-level data cannot see, so homes built before 1986 should still test at the tap.
CITY OF BROOKHAVEN's most recent Lead and Copper Rule result (2022-01-01 to 2024-12-31) was 2.7 ppb at the 90th percentile, below EPA's 15 ppb action level. Because lead usually comes from service lines and household plumbing, homes built before 1986 should still test at the tap.
Yes. EPA's UCMR5 sampling (2024-04-02 to 2025-01-06) detected PFBS, all below federal MCLs. Reverse osmosis and certified activated-carbon filters reduce PFAS.
CITY OF BROOKHAVEN has 4 violations on file since 2016: 1 health-based in the last five years and 3 monitoring or reporting violations in that window. Monitoring violations are paperwork lapses, not measured contamination.
CITY OF BROOKHAVEN reports groundwater as its primary source and serves about 12,513 people (EPA PWSID MS0430002).
We recommend one. Check which contaminant the violations involved (table above) and choose a filter certified for it.
Compare filter options for your Brookhaven tap water
CITY OF BROOKHAVEN has 1 health-based EPA violation in the last five years.
See the filters matched to Brookhaven's EPA results → — which certification actually removes what was found here, and what it does not touch.
Unsure which contaminants to treat? Compare home kits and certified lab testing before buying.
Amazon. We may earn a commission, at no extra cost to you.
CITY OF BROOKHAVEN · SDWIS records since 2016 · 5-year window starts 2021-10-16
EPA records 1 health-based violation for this system in the last five years, all of which are marked resolved or archived. Health-based violations mean a contaminant exceeded its Maximum Contaminant Level (MCL) or a required treatment step was not met.
| Violation | Category | Compliance period | Status |
|---|---|---|---|
| LSL InventoryLEAD AND COPPER RULE REVISIONS | Treatment technique | 2024-10-17 | Resolvedreturned 2024-10-22 |
| LSL ReportingLEAD AND COPPER RULE REVISIONS | Reporting | 2024-10-17 | Resolvedreturned 2024-10-22 |
| Monitoring and Reporting (DBP)Total Haloacetic Acids (HAA5) | Monitoring & reporting | 2023-01-01 → 2023-12-31 | Resolvedreturned 2023-12-31 |
| Monitoring and Reporting (DBP)TTHM | Monitoring & reporting | 2023-01-01 → 2023-12-31 | Resolvedreturned 2023-12-31 |
Source: ECHO SDWA bulk download (SDWA_VIOLATIONS_ENFORCEMENT.csv, SDWIS 2026Q2, file dated 2026-07-09, fetched 2026-09-06)
EPA Lead and Copper Rule 90th-percentile results reported by CITY OF BROOKHAVEN
Well below the 15 ppb action level. In the most recent monitoring period on file (2022-01-01 to 2024-12-31), 90% of the homes CITY OF BROOKHAVEN sampled had lead at or below 2.7 ppb.
EPA's action level is 15 ppb (dropping to 10 ppb under the 2024 Lead and Copper Rule Improvements). There is no safe level of lead; the 90th-percentile figure describes the system, not your tap — homes with lead service lines or pre-1986 plumbing can be higher.
| Monitoring period | Lead 90th percentile | vs 15 ppb action level |
|---|---|---|
| 2022-01-01 → 2024-12-31 | 2.7 ppb | Well below the 15 ppb action level |
| 2019-01-01 → 2021-12-31 | 0.8 ppb | Well below the 15 ppb action level |
| 2016-01-01 → 2018-12-31 | 4 ppb | Well below the 15 ppb action level |
| 2014-01-01 → 2016-12-31 | 2.5 ppb | Well below the 15 ppb action level |
| 2011-01-01 → 2013-12-31 | 3.4 ppb | Well below the 15 ppb action level |
| 2008-01-01 → 2010-12-31 | 3.4 ppb | Well below the 15 ppb action level |
| 2005-01-01 → 2007-12-31 | 2.3 ppb | Well below the 15 ppb action level |
| 2002-01-01 → 2004-12-31 | 2.8 ppb | Well below the 15 ppb action level |
| 1999-01-01 → 2001-12-31 | 5 ppb | Below the action level, but detectable |
| 1996-01-01 → 1998-12-31 | 4 ppb | Well below the 15 ppb action level |
| 1995-01-01 → 1995-12-31 | 3 ppb | Well below the 15 ppb action level |
| 1994-01-01 → 1994-12-31 | 2 ppb | Well below the 15 ppb action level |
Source: ECHO SDWA bulk download (SDWA_LCR_SAMPLES.csv, SDWIS 2026Q2, file dated 2026-07-09, fetched 2026-09-06)
EPA UCMR5 monitoring, 2024-04-02 to 2025-01-06 · 232 PFAS results at entry points to the distribution system
PFBS detected at low levels; no compound was at or above its federal MCL. Detections below the MCL are common in surface-water systems and are reported here exactly as EPA published them.
| Compound | Detects / samples | Max (ppt) | Reporting limit | EPA MCL |
|---|---|---|---|---|
| PFOA | 0 / 8 | < 4 | 4 ppt | 4 ppt |
| PFOS | 0 / 8 | < 4 | 4 ppt | 4 ppt |
| PFHxS | 0 / 8 | < 3 | 3 ppt | 10 ppt |
| PFNA | 0 / 8 | < 4 | 4 ppt | 10 ppt |
| HFPO-DA | 0 / 8 | < 5 | 5 ppt | 10 ppt |
| PFBS | 2 / 8 | 4.4 | 3 ppt | hazard index only |
“< 4 ppt” means below the laboratory reporting limit, not zero. ppt = parts per trillion (ng/L). Results are for finished water leaving the treatment plant.
Lithium (also monitored under UCMR5, not a PFAS): detected in 5 of 8 samples, max 11.1 µg/L. There is no federal limit for lithium.
What PFAS are and how to remove them → · Best filters for PFAS →
Source: UCMR5 occurrence data, EPA Data Summary July 2026 (UCMR5_All.txt)
A point-of-use (under-sink) system typically runs $200-$600 installed; whole-house treatment $1,000-$3,000+ depending on flow and what has to come out. Tell us where you are and a certified water-treatment installer serving Brookhaven will follow up - no obligation.
Groundwater systems draw from wells; naturally occurring arsenic, nitrate, radium and uranium are the readings to watch, along with PFAS near industrial or military sites.
How to test your tap water and the treatment options that actually fit Brookhaven homes
The most reliable way to know what is actually coming out of your tap is a certified mail-in lab test. City-wide EPA data (like the report above) reflects the water leaving the treatment plant, but contaminants such as lead and copper can be picked up from your own service line and household plumbing — so the water at your Brookhaven faucet can differ from the system average. A state-certified lab measures dozens of contaminants at once with results you can trust; you can also find one near you through the EPA's certified-lab list at epa.gov/dwlabcert. Hardware-store test strips are cheaper and instant, but they only screen for a few basics (chlorine, hardness, pH, and a rough lead pass/fail) and are far less accurate — treat them as a first look, not a diagnosis.
Match the treatment to what your test finds. Reverse osmosis (RO) removes the widest range of contaminants — lead, arsenic, nitrate, PFAS, and dissolved solids — which makes an under-sink reverse osmosis system the most thorough choice for Brookhaven households with heavy-metal or PFAS concerns. If your main issue is taste, odor, or chlorine, an activated carbon filter (pitcher, faucet, or under-sink) is simpler and cheaper and handles chlorine and many organic compounds well, though carbon alone does not remove arsenic, nitrate, or most PFAS. NSF-certified pitchers rated for lead reduction are the easiest way to start today while you decide on a permanent setup.
We may earn a commission from testing kits and filters purchased through these links, at no extra cost to you.
What Brookhaven residents measured at their own tap. All reader results →
Reader submissions are unverified and shown separately from EPA data. They reflect one tap on one day, not the utility's compliance record.
No reader results for Brookhaven yet - yours would be the first. A hardness or TDS number from a $10 strip kit is enough to start the map.
Help build the first reader-sourced water map. Enter whatever your test strip, TDS pen or lab report shows - one number is enough.
Brookhaven ranks #40 of 46 graded Mississippi cities.
Deep-dive guides for the specific contaminants EPA data flagged in Brookhaven's water, with removal options for each.
Yes — by EPA's records Brookhaven, MS tap water is safe to drink and earns a B. The grade rests on 1 health-based EPA violation in the last five years and low-level PFAS (PFBS) detected below federal limits. Lead from your own service line or plumbing is the main risk city-level data cannot see, so homes built before 1986 should still test at the tap.
CITY OF BROOKHAVEN's most recent Lead and Copper Rule result (2022-01-01 to 2024-12-31) was 2.7 ppb at the 90th percentile, below EPA's 15 ppb action level. Because lead usually comes from service lines and household plumbing, homes built before 1986 should still test at the tap.
Yes. EPA's UCMR5 sampling (2024-04-02 to 2025-01-06) detected PFBS, all below federal MCLs. Reverse osmosis and certified activated-carbon filters reduce PFAS.
CITY OF BROOKHAVEN has 4 violations on file since 2016: 1 health-based in the last five years and 3 monitoring or reporting violations in that window. Monitoring violations are paperwork lapses, not measured contamination.
CITY OF BROOKHAVEN reports groundwater as its primary source and serves about 12,513 people (EPA PWSID MS0430002).
We recommend one. Check which contaminant the violations involved (table above) and choose a filter certified for it.
CITY OF BROOKHAVEN has 1 health-based EPA violation in the last five years.
Most Popular for PFAS
Waterdrop 3-Stage Under-Sink
Lab-tested against PFAS "forever chemicals" — installs under the sink in minutes and costs far less than RO.
Check Price on AmazonCompare direct from Waterdrop
Reverse osmosis systems for PFAS
Reverse osmosis is the most thorough filtration class against PFAS — browse Waterdrop RO systems and check each model’s own tested claims.
Shop Reverse Osmosis Systems →Whole-Home Filtration System
Whole-house system — treats every tap at the source
For consistently poor water, a whole-home system filters every faucet, shower, and appliance — the permanent, install-once fix that goes beyond a single point-of-use filter.
Explore Whole-Home SystemsNot sure what filter you need?
Test your tap water first, so you filter for what's actually in it.
Shop Home Water Test Kits →We may earn a commission from Amazon and Waterdrop when you purchase through our links, at no extra cost to you.
Based on contaminants detected in your water, these resources may be helpful:
Find the right filter for your Brookhaven water quality needs:
Understand your water better with our in-depth guides on contaminants, filtration, and water safety.