Loading water data...
Not health advice. Contact your local water utility for concerns.
Data from EPA Water Quality Reports. For official information, contact your water utility or health department.
EPA records for CITY CORPORATION • Updated September 2026
Grade A — based on EPA compliance records, lead testing and PFAS monitoring
CITY CORPORATION has a clean recent record: no health-based violations in the last five years and no lead, PFAS or historical monitoring result that costs it more than a few points.
Yes — by EPA's records, Russellville's tap water earns a A: few recent violations, lead at 1 ppb (90th percentile) and no PFAS detected. Lead from home plumbing is the main remaining risk.
By EPA's records, yes. CITY CORPORATION earns a A: 1 health-based violation in the last five years, a lead 90th-percentile result of 1 ppb, and no PFAS detected in UCMR5 sampling. Lead from your own plumbing is the main risk city data cannot see.
CITY CORPORATION's most recent Lead and Copper Rule result (2023-01-01 to 2025-12-31) was 1 ppb at the 90th percentile, below EPA's 15 ppb action level. Because lead usually comes from service lines and household plumbing, homes built before 1986 should still test at the tap.
No. None of the 116 UCMR5 PFAS results for CITY CORPORATION (2024-08-14 to 2025-05-14) were at or above the reporting limit of roughly 3–5 ppt.
CITY CORPORATION has 1 violation on file since 2016: 1 health-based in the last five years and 0 monitoring or reporting violations in that window. Monitoring violations are paperwork lapses, not measured contamination.
CITY CORPORATION reports surface water as its primary source and serves about 29,260 people (EPA PWSID AR0000446).
We recommend one. Check which contaminant the violations involved (table above) and choose a filter certified for it.
Want to know what's really in your Russellville tap water?
CITY CORPORATION has 1 health-based EPA violation in the last five years.
Tap Score certified lab · Amazon. We may earn a commission, at no extra cost to you.
CITY CORPORATION · SDWIS records since 2016 · 5-year window starts 2021-09-07
EPA records 1 health-based violation for this system in the last five years, all of which are marked resolved or archived. Health-based violations mean a contaminant exceeded its Maximum Contaminant Level (MCL) or a required treatment step was not met.
| Violation | Category | Compliance period | Status |
|---|---|---|---|
| Maximum Contaminant Level Violation, AverageTTHM | MCL exceeded | 2025-10-01 → 2025-12-31 | Archived |
Source: ECHO SDWA bulk download (SDWA_VIOLATIONS_ENFORCEMENT.csv, SDWIS 2026Q2, file dated 2026-07-09, fetched 2026-09-06)
EPA Lead and Copper Rule 90th-percentile results reported by CITY CORPORATION
Well below the 15 ppb action level. In the most recent monitoring period on file (2023-01-01 to 2025-12-31), 90% of the homes CITY CORPORATION sampled had lead at or below 1 ppb.
EPA's action level is 15 ppb (dropping to 10 ppb under the 2024 Lead and Copper Rule Improvements). There is no safe level of lead; the 90th-percentile figure describes the system, not your tap — homes with lead service lines or pre-1986 plumbing can be higher.
| Monitoring period | Lead 90th percentile | vs 15 ppb action level |
|---|---|---|
| 2023-01-01 → 2025-12-31 | 1 ppb | Well below the 15 ppb action level |
| 2020-01-01 → 2022-12-31 | 1 ppb | Well below the 15 ppb action level |
| 2017-01-01 → 2019-12-31 | 3 ppb | Well below the 15 ppb action level |
| 2014-01-01 → 2016-12-31 | 4 ppb | Well below the 15 ppb action level |
| 2009-01-01 → 2011-12-31 | 3 ppb | Well below the 15 ppb action level |
| 2006-01-01 → 2008-12-31 | 6 ppb | Below the action level, but detectable |
| 2003-01-01 → 2005-12-31 | 6 ppb | Below the action level, but detectable |
| 2000-01-01 → 2002-12-31 | 4 ppb | Well below the 15 ppb action level |
| 1997-01-01 → 1999-12-31 | 2 ppb | Well below the 15 ppb action level |
| 1996-01-01 → 1996-12-31 | 1 ppb | Well below the 15 ppb action level |
| 1995-01-01 → 1995-12-31 | 3 ppb | Well below the 15 ppb action level |
| 1994-01-01 → 1994-12-31 | 4 ppb | Well below the 15 ppb action level |
Source: ECHO SDWA bulk download (SDWA_LCR_SAMPLES.csv, SDWIS 2026Q2, file dated 2026-07-09, fetched 2026-09-06)
EPA UCMR5 monitoring, 2024-08-14 to 2025-05-14 · 116 PFAS results at entry points to the distribution system
No PFAS detected. None of the 116 UCMR5 PFAS results for CITY CORPORATION were at or above the method reporting limit. Reporting limits are about 3–5 ppt, so “not detected” means below that threshold — not proven zero.
| Compound | Detects / samples | Max (ppt) | Reporting limit | EPA MCL |
|---|---|---|---|---|
| PFOA | 0 / 4 | < 4 | 4 ppt | 4 ppt |
| PFOS | 0 / 4 | < 4 | 4 ppt | 4 ppt |
| PFHxS | 0 / 4 | < 3 | 3 ppt | 10 ppt |
| PFNA | 0 / 4 | < 4 | 4 ppt | 10 ppt |
| HFPO-DA | 0 / 4 | < 5 | 5 ppt | 10 ppt |
| PFBS | 0 / 4 | < 3 | 3 ppt | hazard index only |
“< 4 ppt” means below the laboratory reporting limit, not zero. ppt = parts per trillion (ng/L). Results are for finished water leaving the treatment plant.
What PFAS are and how to remove them →
Source: UCMR5 occurrence data, EPA Data Summary July 2026 (UCMR5_All.txt)
EPA Six-Year Review 4 compliance samples for CITY CORPORATION · finished water only · dated data, released 2024
These are the regulated-contaminant samples CITY CORPORATION reported to its state between 2012 and 2019 — the most recent nationwide sample-level dataset EPA has published. Total trihalomethanes (TTHM), Haloacetic acids (HAA5) are flagged below; the status column explains why. Treat this as history, not today's tap water.
| Contaminant | Samples | Average | Max | EPA limit | Status |
|---|---|---|---|---|---|
| Arsenic | 80 detects | 0 µg/L | ND | 10 µg/LMCL | Not detected |
| Fluoride | 103 | 0.845 mg/L | 1.1 mg/L | 4 mg/LMCL | Within MCL |
| Chromium (total) | 80 detects | 0 µg/L | ND | 100 µg/LMCL | Not detected |
| Total trihalomethanes (TTHM) | 121 | 54.274 µg/L | 110 µg/L | 80 µg/LMCL (LRAA) | 12 single samples over MCL; average within limit |
| Haloacetic acids (HAA5) | 125 | 38.315 µg/L | 85.7 µg/L | 60 µg/LMCL (LRAA) | 11 single samples over MCL; average within limit |
| Lead (tap samples) | 6811 detects | 0.824 µg/L | 18 µg/L | 15 µg/Laction level (90th percentile) | Reported, not scored (compliance is on the 90th percentile) |
| Copper (tap samples) | 6027 detects | 43.12 µg/L | 370 µg/L | 1300 µg/Laction level (90th percentile) | Reported, not scored (compliance is on the 90th percentile) |
Averages count non-detects as zero. TTHM and HAA5 limits are locational running annual averages, so a single high sample is not a violation — we grade those on the average only. Lead and copper rows are individual tap samples and are shown for context; compliance (and our score) uses the 90th-percentile result above. LRAA = locational running annual average; ND = not detected.
Source: SYR4 Six-Year Review compliance monitoring data 2012–2019 (released 2024-03)
CITY CORPORATION · 13,202 service lines inventoried · Q2 2026 snapshot
CITY CORPORATION reports no confirmed lead service lines, but 7,361 lines (56%) have not yet been verified, so lead cannot be ruled out for those homes. Utilities must keep investigating unknown lines under EPA's Lead and Copper Rule Improvements.
Source: EPA SDWIS Service Line Inventory (Q2 2026) · PWS ID AR0000446 · See all Arkansas lead service lines. We may earn a commission from filters and test kits, at no extra cost to you.
Surface-water systems draw from rivers, lakes or reservoirs and must filter and disinfect, which is why disinfection byproducts (TTHM, HAA5) are the readings to watch.
How to test your tap water and the treatment options that actually fit Russellville homes
The most reliable way to know what is actually coming out of your tap is a certified mail-in lab test. City-wide EPA data (like the report above) reflects the water leaving the treatment plant, but contaminants such as lead and copper can be picked up from your own service line and household plumbing — so the water at your Russellville faucet can differ from the system average. A state-certified lab measures dozens of contaminants at once with results you can trust; you can also find one near you through the EPA's certified-lab list at epa.gov/dwlabcert. Hardware-store test strips are cheaper and instant, but they only screen for a few basics (chlorine, hardness, pH, and a rough lead pass/fail) and are far less accurate — treat them as a first look, not a diagnosis.
Match the treatment to what your test finds. Reverse osmosis (RO) removes the widest range of contaminants — lead, arsenic, nitrate, PFAS, and dissolved solids — which makes an under-sink reverse osmosis system the most thorough choice for Russellville households with heavy-metal or PFAS concerns. If your main issue is taste, odor, or chlorine, an activated carbon filter (pitcher, faucet, or under-sink) is simpler and cheaper and handles chlorine and many organic compounds well, though carbon alone does not remove arsenic, nitrate, or most PFAS. NSF-certified pitchers rated for lead reduction are the easiest way to start today while you decide on a permanent setup.
We may earn a commission from testing kits and filters purchased through these links, at no extra cost to you.
Russellville ranks #18 of 18 graded Arkansas cities.
By EPA's records, yes. CITY CORPORATION earns a A: 1 health-based violation in the last five years, a lead 90th-percentile result of 1 ppb, and no PFAS detected in UCMR5 sampling. Lead from your own plumbing is the main risk city data cannot see.
CITY CORPORATION's most recent Lead and Copper Rule result (2023-01-01 to 2025-12-31) was 1 ppb at the 90th percentile, below EPA's 15 ppb action level. Because lead usually comes from service lines and household plumbing, homes built before 1986 should still test at the tap.
No. None of the 116 UCMR5 PFAS results for CITY CORPORATION (2024-08-14 to 2025-05-14) were at or above the reporting limit of roughly 3–5 ppt.
CITY CORPORATION has 1 violation on file since 2016: 1 health-based in the last five years and 0 monitoring or reporting violations in that window. Monitoring violations are paperwork lapses, not measured contamination.
CITY CORPORATION reports surface water as its primary source and serves about 29,260 people (EPA PWSID AR0000446).
We recommend one. Check which contaminant the violations involved (table above) and choose a filter certified for it.
CITY CORPORATION has 1 health-based EPA violation in the last five years.
For Everyday Peace of Mind
Brita Elite Pitcher
Your water already tests well — a simple carbon filter improves taste and catches trace contaminants.
Check Price on AmazonNot sure what filter you need?
Test your tap water first, so you filter for what's actually in it.
Shop Home Water Test Kits →We may earn a commission from Amazon and Waterdrop when you purchase through our links, at no extra cost to you.
Find the right filter for your Russellville water quality needs:
Understand your water better with our in-depth guides on contaminants, filtration, and water safety.