2 cities ranked best to worst by EPA-record water quality score
Washington has the best tap water grade in District of Columbia (A, 92/100); Washington Navy Yard is lowest (D, 62/100). 1 of the 2 graded systems has a health-based EPA violation in the last five years; 50% earn a B or better, so safety depends on your utility. Is District of Columbia tap water safe to drink? Yes, for most residents, by EPA compliance records. 97% of the 649,123 people served by the 2 District of Columbia systems we grade get water from a system with no health-based EPA violation in the last five years. Statewide, District of Columbia ranks #49 of 51 states for water quality (average 77/100 vs 87 nationally) — see every state's rank. Nationally, District of Columbia's highest-ranked city is Washington at #579 of 1138 graded US cities — see the US cities with the best tap water (top 10 and top 50).
This page ranks the 2 District of Columbia cities whose water systems we have matched to EPA records. Every city starts at 100 points and loses points for health-based EPA violations in the last five years (SDWIS 2026Q2), its most recent Lead and Copper Rule 90th-percentile result, PFAS detected in EPA's 2023–2026 UCMR5 monitoring, and 2012–2019 compliance samples that averaged near or above a limit. Letters follow fixed bands (A ≥90, B ≥80, C ≥70, D ≥60, F below 60). Cities run from the highest score (Washington) down to the lowest (Washington Navy Yard); ties are ordered by population served. See the full scoring methodology for every deduction and the data vintages.
An A or B grade points to water that consistently tests within federal safety limits, while a C suggests moderate issues worth watching and a D or F flags contaminants or compliance problems serious enough to act on. These grades describe system-level water leaving the treatment plant — they can't account for your home's own plumbing, so older houses with lead service lines or fixtures can add contaminants after the water arrives. For a contaminant-by-contaminant view, see the District of Columbia contaminant breakdown or drill into the county-level rankings.
What the EPA service line inventory and our District of Columbia guide say, beyond the scores.
We track 2 cities in District of Columbia. Those 1 systems report serving 632,323 people in EPA's Safe Drinking Water Information System (SDWIS).
Of all 2 cities District of Columbia cities we can grade from EPA records, 1 city (50%) grade B or better, 0 sit in the C range and 1 grade D or F. The average score is 77/100.
EPA records 3 health-based violations in the last five years across 1 city. Monitoring and reporting violations (8 in the same window) are paperwork lapses and cost far fewer points.
2 cities have a Lead and Copper Rule 90th-percentile result from 2020 or later: none at 5 ppb or more — every reported result is well below the action level.
EPA's UCMR5 PFAS monitoring (2023–2026) covers 2 cities: PFAS were detected in 2 cities, all below the 4 ppt PFOA/PFOS limit.
Washington scores highest (92) and Washington Navy Yard lowest (62), a 30-point spread.
Lead pipes are the part of tap-water risk a treatment-plant grade cannot see, so start with EPA's service line inventory (Q2 2026 snapshot). 5 District of Columbia systems inventoried 138,406 service lines: 16,935 confirmed lead plus 225 galvanized lines requiring replacement, spread across 1 system. Only 13,428 lines (9.7%) remain unverified, so District of Columbia's inventory is comparatively complete.
Of the 1 city-linked District of Columbia utilities with an inventory on file, 1 reports at least one lead or galvanized-requiring-replacement line. The largest, D.C. WATER AND SEWER AUTHORITY (Washington, 632,323 served), reports 16,935 lead lines and 190 galvanized requiring replacement.
| Contaminant | Federal limit | Cities elevated | Over limit | Highest reading | Why it matters |
|---|---|---|---|---|---|
| Total Trihalomethanes | EPA MCL 0.080 mg/L (80 ppb) | 2 | 0 | Washington Navy Yard | Total Trihalomethanes is associated with liver, kidney and nervous-system effects and increased cancer risk over long exposure. |
| Haloacetic Acids | EPA MCL 0.060 mg/L (60 ppb) for HAA5 | 1 | 0 | Washington Navy Yard | Haloacetic Acids is associated with increased cancer risk over long exposure. |
Service line counts: EPA SDWIS Service Line Inventory, Q2 2026 snapshot (updated 2026-08-18). Limits: EPA National Primary Drinking Water Regulations.
How District of Columbia's 2 cities are distributed by water quality grade
1 out of 2 cities meet or exceed a B grade for water quality
Sorted by water quality score from best to worst. Click any city for a detailed water quality report.
| Rank | City | Score | Grade |
|---|---|---|---|
| 1 | Washington | 92/100 | A |
| 2 | Washington Navy Yard | 62/100 | D |
Sources: EPA SDWIS/ECHO violations and Lead and Copper Rule results (2026Q2 extract), UCMR5 PFAS occurrence (2023–2026), SYR4 compliance samples (2012–2019). Rubric v2 — methodology.
Found your city above? These guides turn its grade into an action plan.
Pitcher vs. under-sink vs. reverse osmosis, matched to the contaminants reported in District of Columbia systems.
Taste, odor, trihalomethanes, and why a carbon filter handles them
Where it comes from, how to test, and which filters are NSF 53 certified to remove it
Best filters for lead →EPA's inventory of lead pipes by water system — a risk these plant-level grades cannot capture.
Put a District of Columbia city next to where you're moving from (or to) and see every contaminant head to head.
Matched to the contaminants most often reported in District of Columbia water. Check your city's report above first; treat for what is actually there.
Compare pitcher, under-sink and reverse osmosis systems on the water filter guide. On a private well? EPA utility records don't cover wells, so start with water testing in District of Columbia.
The best water quality in District of Columbia is found in Washington with a score of 92/100 and a grade of A. This puts Washington among the top-performing cities in the country for drinking water safety.
The most concerning water quality is in Washington Navy Yard scoring 62/100 with a grade of D. Residents may want to consider home water testing and filtration options.
1 city with D or F grades:
The statewide average score is 77/100, which is 10 points below the national average of 87/100. Over half (50%) of District of Columbia cities score above the national average, though some areas face challenges.
1 of 2 graded District of Columbia cities have at least one health-based EPA violation in the last five years (3 in total). A health-based violation means the system exceeded a federal contaminant limit or missed a required treatment step; it does not mean the water is unsafe today.
See every contaminant tracked in District of Columbia water, city by city →
1 District of Columbia city has a D or F grade. Residents in those areas — and anyone wanting extra protection — should consider a certified water filter that removes the specific contaminants found in District of Columbia water systems.
Best for Multi-Contaminant Removal
APEC Reverse Osmosis System
Removes lead, PFAS, arsenic, nitrates, fluoride & 99%+ of contaminants. NSF certified.
Check Price on AmazonBest Pitcher Filter (Renter-Friendly)
ZeroWater 10-Cup Filter Pitcher
NSF 53 certified to reduce lead and chromium. No installation — fill from the tap and pour.
Check Price on AmazonTreats Every Tap, Not Just One
Aquasana Whole-House Filter (WH-1000-B)
Reduces 97% of chlorine at the main line, so showers and appliances are covered too — a point-of-use filter never reaches them.
Check Price on AmazonFilters are heavy. A whole-house system ships on a pallet and an under-sink unit is awkward to carry — Prime covers the delivery free, and the first 30 days cost nothing.
Try Prime freeFree for 30 days, then renews at Amazon’s current Prime price unless cancelled. We may earn a commission, at no extra cost to you.
We may earn a commission when you purchase through our links, at no extra cost to you.
Two cities' EPA records side by side — grade, health-based violations, lead and PFAS — with a filter pick matched to the lower-scoring one.
Washington has the best water quality grade among the 2 District of Columbia cities we can grade, with a score of 92/100 (grade A). Scores start at 100 and lose points for health-based EPA violations, lead 90th-percentile results, PFAS detections in EPA's UCMR5 monitoring and historical (2012–2019) readings near a limit.
Yes, for most residents, by EPA compliance records. 97% of the 649,123 people served by the 2 District of Columbia systems we grade get water from a system with no health-based EPA violation in the last five years. Across the 2 District of Columbia cities we grade from EPA records, the average score is 77/100 and 50% earn a B or better. 1 city has at least one health-based EPA violation in the last five years. 1 city grades D or F (lowest: Washington Navy Yard D); residents there should consider a certified filter matched to the finding on the city page. Lead from household plumbing is not captured by any city-level grade.
District of Columbia ranks #49 of the 51 states we grade, with an average city score of 77/100 against a national average of 87/100. The state rank is the mean score of each state's graded cities from EPA records; within District of Columbia, Washington ranks #1 of 2 cities.
By population served: Washington grades A (92/100, #1 of 2); Washington Navy Yard grades D (62/100, #2 of 2, 3 health-based EPA violations in 5 years). Each city report lists the utility's violations, lead 90th-percentile result and PFAS results.
1 of 2 graded District of Columbia cities have at least one health-based EPA violation in the last five years (3 in total): Washington Navy Yard (3, grade D). A health-based violation means a system exceeded a federal limit or missed a required treatment step; it does not mean the water is unsafe today. Contaminants commonly reported in District of Columbia water include disinfection byproducts, lead, nitrates, naturally occurring minerals. Each city report lists the specific violations, lead 90th-percentile result and PFAS monitoring.
It depends on what is in your water, so start with your city's report above or a lab test. For the contaminants most often reported in District of Columbia: chlorine and disinfection byproducts — activated carbon (NSF/ANSI 42 for taste and odor, NSF/ANSI 53 for trihalomethanes); lead — a carbon-block filter certified to NSF/ANSI 53 for lead, or reverse osmosis (NSF/ANSI 58); nitrates — reverse osmosis or anion exchange; carbon filters and boiling do not remove nitrate; pfas — reverse osmosis, or a carbon filter certified to NSF/ANSI 53 or 58 for PFOA/PFOS. On city water, an under-sink reverse osmosis system covers the widest range of these. Private-well households should test first, because utilities' EPA records do not cover wells.
Washington, District of Columbia's largest graded water system (632,323 people served), grades A at 92/100 and ranks #1 of 2 District of Columbia cities. That makes it the top-ranked city in the state. It has no health-based EPA violations in the last five years. Among the 57 big US cities whose main system serves 500,000+ people, Washington ranks #29. Grades come from EPA violation records, lead 90th-percentile results and PFAS monitoring, not from taste tests.
Of the 2 graded District of Columbia cities, 1 city has a D or F grade. 1 of 2 (50%) score above the national average of 87/100 across all graded U.S. cities in our dataset.
This page ranks 2 District of Columbia cities from EPA's Safe Drinking Water Information System (violations and lead results, 2026Q2), UCMR5 PFAS monitoring (2023–2026) and Six-Year Review sample data (2012–2019). Each city link opens a report with the utility's violation history, lead 90th-percentile results and PFAS table. For official Consumer Confidence Reports (CCR), contact your local water utility — federal law requires all community water systems to deliver an annual CCR to customers. The District of Columbia state environmental agency and the EPA's Safe Drinking Water Information System (SDWIS) also publish official water quality data.
State water quality summary and key statistics
Top 20 cities with the cleanest water
Top-ranked cities nationwide
Cities with the most concerning water
Compare water quality across all 50 states
Side-by-side water quality comparison
Which contaminants show up in District of Columbia water
Certified filters matched to your contaminants