Not health advice. Contact your local water utility for concerns.
Data from EPA Water Quality Reports. For official information, contact your water utility or health department.
Real EPA measurements of fluoride for South Carolina water systems — Six-Year Review compliance samples 2012–2019 (historical). Methodology
Every South Carolina system with a fluoride result in EPA's data, sorted by level. Averages of 2012–2019 finished-water samples, non-detects counted as zero — historical, not today's tap.
| City | Level | Period | EPA Limit | % of Limit | Status |
|---|---|---|---|---|---|
| MarionGrade A | 1.38 mg/LAverage of 32 samples | 2012–2019 | 4.00 mg/L | 34.6% | Safe |
| DalzellGrade A | 1.34 mg/LAverage of 8 samples | 2012–2019 | 4.00 mg/L | 33.6% | Safe |
| Pawleys IslandGrade C | 1.24 mg/LAverage of 16 samples | 2012–2019 | 4.00 mg/L | 30.9% | Safe |
| WalterboroGrade A | 1.08 mg/LAverage of 29 samples | 2012–2019 | 4.00 mg/L | 27.0% | Safe |
| Shaw AfbGrade C | 0.893 mg/LAverage of 13 samples | 2012–2019 | 4.00 mg/L | 22.3% | Safe |
| ConwayGrade C | 0.862 mg/LAverage of 25 samples | 2012–2019 | 4.00 mg/L | 21.6% | Safe |
| LugoffGrade C | 0.756 mg/LAverage of 8 samples | 2012–2019 | 4.00 mg/L | 18.9% | Safe |
| North Myrtle BeachGrade C | 0.727 mg/LAverage of 3 samples | 2012–2019 | 4.00 mg/L | 18.2% | Safe |
| PickensGrade A | 0.723 mg/LAverage of 8 samples | 2012–2019 | 4.00 mg/L | 18.1% | Safe |
| West ColumbiaGrade C | 0.708 mg/LAverage of 16 samples | 2012–2019 | 4.00 mg/L | 17.7% | Safe |
| AikenGrade B | 0.696 mg/LAverage of 17 samples | 2012–2019 | 4.00 mg/L | 17.4% | Safe |
| SpartanburgGrade A | 0.679 mg/LAverage of 10 samples | 2012–2019 | 4.00 mg/L | 17.0% | Safe |
| SenecaGrade A | 0.679 mg/LAverage of 8 samples | 2012–2019 | 4.00 mg/L | 17.0% | Safe |
| NewberryGrade C | 0.675 mg/LAverage of 8 samples | 2012–2019 | 4.00 mg/L | 16.9% | Safe |
| Rock HillGrade A | 0.649 mg/LAverage of 8 samples | 2012–2019 | 4.00 mg/L | 16.2% | Safe |
| DarlingtonGrade A | 0.604 mg/LAverage of 8 samples | 2012–2019 | 4.00 mg/L | 15.1% | Safe |
| GreenvilleGrade A | 0.592 mg/LAverage of 16 samples | 2012–2019 | 4.00 mg/L | 14.8% | Safe |
| GreerGrade A | 0.590 mg/LAverage of 8 samples | 2012–2019 | 4.00 mg/L | 14.8% | Safe |
| OrangeburgGrade B | 0.594 mg/LAverage of 8 samples | 2012–2019 | 4.00 mg/L | 14.8% | Safe |
| OkatieGrade D | 0.588 mg/LAverage of 26 samples | 2012–2019 | 4.00 mg/L | 14.7% | Safe |
| ColumbiaGrade D | 0.581 mg/LAverage of 17 samples | 2012–2019 | 4.00 mg/L | 14.5% | Safe |
| GreenwoodGrade C | 0.568 mg/LAverage of 8 samples | 2012–2019 | 4.00 mg/L | 14.2% | Safe |
| WoodruffGrade B | 0.516 mg/LAverage of 7 samples | 2012–2019 | 4.00 mg/L | 12.9% | Safe |
| North AugustaGrade A | 0.507 mg/LAverage of 8 samples | 2012–2019 | 4.00 mg/L | 12.7% | Safe |
| WalhallaGrade A | 0.484 mg/LAverage of 8 samples | 2012–2019 | 4.00 mg/L | 12.1% | Safe |
Showing 25 of 42 cities. View individual city pages for detailed reports.
While fluoride at low levels is added to prevent tooth decay, excessive exposure can cause problems. Dental fluorosis causes white spots on teeth in children. Skeletal fluorosis from long-term exposure to very high levels can cause joint stiffness and bone damage. Studies have suggested potential links between high fluoride levels and thyroid function issues.
Water additive for dental health; erosion of natural deposits; discharge from fertilizer factories
Based on our analysis of EPA Safe Drinking Water Information System (SDWIS) data and local water utility reports,fluoride has been detected in 42 South Carolina water systems. The average level across all tested cities is 14% of the EPA Maximum Contaminant Level (MCL), with the highest detection at 34.6% of the limit.
The EPA MCL for fluoride is 4.0 mg/L, with a secondary standard of 2.0 mg/L. The EPA MCL for fluoride is 4 mg/L. This limit is set to protect public health based on available scientific evidence about the contaminant's health effects.
42 South Carolina cities have fluoride detected in their water supply. All tested cities are within EPA safety limits.
Dental fluorosis (tooth discoloration), skeletal problems at high levels, potential thyroid effects. The most vulnerable groups include children during tooth development and people with kidney disease.
The most effective methods for removing fluoride include Reverse Osmosis, Distillation, Activated Alumina. Look for filters certified by NSF/ANSI for fluoride reduction.
The EPA Maximum Contaminant Level (MCL) for fluoride is 4 mg/L.The EPA MCL for fluoride is 4.0 mg/L, with a secondary standard of 2.0 mg/L.
This page shows what South Carolina utilities reported for fluoride. It cannot tell you what is coming out of your own tap: utility samples are taken across a whole system and averaged, levels vary by address and season, and anything picked up after the water leaves the main never appears in their report.
Home water test kitscheck your own tap before buying any filterRecommended filtration methods for fluoride removal:
Removes 90-95% of fluoride
Very effective
Specifically designed for fluoride
Paid links. We earn a commission if you buy, at no extra cost to you. Filters are matched to the removal methods listed above for fluoride.